tcujsauce
Active Member
I'll be in charge of making sure nobody taps on the glass of the aquarium!![]()
Plan is in place. Huzzah! Now, let us gingerly touch our tips...
I'll be in charge of making sure nobody taps on the glass of the aquarium!![]()



2 for 2. And you are right steele, it is creepy, like many of your posts.
View attachment 2105
View attachment 2106
View attachment 2107
Upgraded the front drum brakes to disc brakes and the 20" Rockstars actually fit!! The bar with be finished out in mesuite wood with 8 premium bottles and a soda gun.
The 42" tv was too high for the low profile bed cover ( 1" high aluminum diamond plate) so we ended up cutting out a "pocket" in the floor of the bed. Once you raise the bed cover by remote, the tv will adjust with a lever (shock from a chair) to level out so you can watch tv from the back or swing it our 90 degrees and watch from bar side of the truck. Speakers are going inside the bed. Slowly but surely it's coming along, but it will be as dependable as a new car.
Is that Bennett in the (aggressively unbuttoned) blue shirt and sunglasses hanging from the buttons?
Agree here. that horns down sign is Oakieish.Horned Frogs sign beats Horns down any day of the week and twice on Sunday.
TCU has a great deal to be proud of; there's no need to spend even a millisecond insulting UT.
Other than that, great pic.
Go Frogs!
Looks great! Can't wait to see more photos. I'd like to see how your TV mount if you've got a photo... curious what that looks like.
![]()
I always figured the best picture was when Maniac suited up for a Clemson game
Gah this kid was just begging to get made fun of... who wears that douchy choker necklace, especially for a damn football picture?!?!
The first picture shows how it hangs from the bed cover. We used round steel stock with rollerbearings to hang from the bedcover and rotate as the cover goes upwards. The tv mount is attached to square steel stock that is welded to the round piece. Problem: When we hung the tv, the weight caused it to shift to much and it needed bracing. Therefore, we came up with the shock idea from a chair. The pressure holds it in place while in transport and as it raises. Once the bed cover is raised, just pull the lever and adujust as needed. Easy.
Also, since the tv mount can extend out and turn to the side, we made a "pin" you can see in the first pic to hold the tv and mount in place during transport or watching the tv from the rear of the truck. Just pull the pin and pull it out if you want to watch it from the side.
The second picture shows how we did the crossbracing and the shock.
We did make the pocket in the bed large enough to hold a 46" tv in case we decide to upgrade.
I don't disagree..
I submit this as a finalist.
![]()
Very cool. Will you have the TV mounted while you're driving, or will that be too rough on it?
Since we cut out a 7 inch deep by 46 inch wide pocket so the tv will sit a couple of inches below the bed when lowered, we are putting memory foam in the pocket so that the tv will be padded and ride well. The tv will stay in the vehicle at all times but will be garage kept and available for party use on a moments notice.

